CNC GAS / PLASMA PROFILE CUTTING SYSTEMS

Arcraft Plasma Equipments manufactures,supply and Export CNC GAS / PLASMA PROFILE CUTTING SYSTEMS

Cutting Width	:	1 to 5 meters in steps of 0.5 meter
Cutting Length	:	1 to 30 meters in steps of 1 meter
Cutting Head	:	GAS and / or PLASMA
Cutting Stations	:	Single / or Multiples
Auto Height Control	:	Capacitive type / Arc ZVoltage type
Plasma Source	:	Inverter based with 100% duty cycle
Software	:	Windows based
Nesting Software	:	Included

MACHINE TYPE: CNC PROFILE CUTTING MACHINE

MODEL: APC2540G

1.	Cutting Torches	:	Gas : 1
2.	Working Width	:	2500mm
3.	Working Length	:	4000mm
4.	Cutting Speed	:	30-3000 mm/ min
5.	Accuracy	:	± 1.0 mm
6.	Kerfs compensation	:	Pre-Kerf through software

DESCRIPTION:-

BASIC STRUCTURE: Machine consists of a gantry supported on carriage on operator‘s side & a free roller on the
other. Driven by motors one each on X-axis & Y-axis.

DRIVE MECHANISM: The motion along longitudinal (Y) axis is powered by digital controlled motor Panasonic or
equivalent make coupled with backlash free planetary gearboxes of Panasonic or equivalent make. This
arrangement provides smooth acceleration, deceleration & controlled profile cutting speeds.
The motion along cross (X) axis is powered by digital controlled motor mounted on the master/control console.

CNC CONTROLLER: Microsoft windows XP / 7 based easy to operate CNC profile cutting controller .Built around
industrial grade computer with peripherals designed specifically for the metal cutting industry to work in harsh
working environment with dust, smoke etc.

Operating system: Microsoft windows XP –Embedded version.

Processor : Intel 2.5 GHZ or greater
Memory : 1 GB
Hard drive : 80GB

OXY-FUEL CUTTING STATION:

1.	Number of Gas Torches	:	1
2.	Cutting Capacity	:	70mm
3.	Gas	:	Oxygen Acetylene or LPG

High / Low gas pressure change with Toggle switch on the operator’s console.
Ball Screw / motor driven torch up/ down mechanism for Z-axis.
Easy o access set of regulars for gas pressure setting.
Ease, Smooth & Clean Piercing .
Manual gas control valves on each torch for preheat oxygen & adjust / set the flame.
Flash back arrestors provided on cutting stations for safety of the machine.

AUTOMATIC TORCH HEIGHT CONTROLLER:-
Capacitive type automatic torch height controller helps maintain constant distance between torch & work piece
during the entire cut motion .this helps counter the waviness / undulations present in the work piece.

NESTING SOFTWARE:-
Nesting software as standard feature places shapes to be profile cut in such a way that optimum utilization of
material is obtained.

FEATURES OF NESTING SOFTWARE:-

File import from auto cad.
Automatic nesting of multiple parts & sheets
Off cut nesting ,manual nesting
Increment nesting to combine automatic as well as manual nesting.
Automatic a well as manual leading/lead out generation.
Automatic tool path generation & compensation.
Automatic as well as manual off cut generation.
Corner loop generation to achieve better finish at sharp turns
Tool path modification to avoid torch hit during rapid motion.

CUSTOMER TO PROVIDE THE FOLLOWING:-

Raised RCC floor beam with solid I beam for rail mounting
Single phase 220VAC supply for CNC with earthing
UPS 3 KVA capacity for CNC
Three phase, 4 wire, 415VAC supply for Plasma machine with earthing
Compressed air supply 6 bar/10cfm in case of Plasma machine.
Gas cylinder / manifold of Oxygen & Acetylene incase of Gas cutting.
Cutting Table
Standard drawing for civil work & cutting table will be provided by us.